-
COMPRESSION PIPE PLUG
IK’s Compression Pipe Plugs features the proven principle of solid polyurethane seals. Larger diameter plugs have the multi-seal design complete with ceramic grit.
-
CRYSTAL NVISION
Multi-Purpose Recorder
-
Pipe Alignment Tool
Sumner Clamp Champ
-
Ridgid Pump
IK’s Ridgid pump tests all types of installations such as heating, compressed air and refrigeration systems, oil installations, fire lines and small bore pipelines.
-
Inspection Camera
The IK Pipe Inspection push cameras are designed for the toughest industrial inspection. Our different pipe inspection cameras system easily bends around tight radius pipes.
-
Hydrostatic Pressure Testing Kit
IK-Norway’s Hydrostatic Pressure Testing Kit has been put together to comply with all of IK’s localised pressure testing tools, but it is also suited for spool/full scale testing.
-
FLANGE WELD TESTER
IK-Group’s Tyre Type Flange Weld Testers reduce the cost by carrying out localised pressure testing on new and existing flange welds and pipe components.
-
Medium Pressure Pipe Plug
IK’s Medium Pressure Pipe Plugs features the proven principle of the inflatable polyurethane tyre.
-
Internal Weld Tension Tester
IK’s Internal Weld Tension Testers reduce the cost by carrying out localised pressure testing on new and existing flange welds and pipe components.
-
In-line Abandonment Plug
IK’s In-line Abandonment Plugs are recommended for DBB weld isolation applications.
-
20″ freeze plug – valve replacement
Freeze plug in 20″ carbon steel pipe
-
Flange leak seal clamp
Load on bolts (High area of working pressure)
-
Epoxy filled repair clamp
Suspected leak on 18″ overflow inside Coalescer vessel
-
18″ Pipe reinforcement with 2″ by-pass
18″ line with corrosion
-
HT clamp – decommissioning
Decompress unknown high pressure
-
IK standard HT straight clamps
Hot tapping
-
HT elbow clamps
Hot tapping in bend
-
Hot tapping clamp
Decommissioning
-
Valve replacement – new FPSO
10″ valve replacement
-
3in remote plug set-up (DB&B)
3″ valve replacement
-
4in pipe repair clamp – branch
Corrosion on 2″ branch line
-
4″ repair clamp – Corrosion
Corrosion on 4″ spool full length, close to one of the flange welds
-
24″x8″ o-let saddle clamp
Crack on 8″ branch line with 45 deg bend and weld-O-let
-
Bend clamp – corrosion in weld
Corrosion on 8″ branch line with 90 deg bend
-
High pressure clamp – corrosion in weld
Corrosion on 1″ branch line with 90 deg bend
-
8″ valve replacment – double barrier
8″ valve replacement
-
Corrective Maintenance
Valve repair, piping repair, modification
-
Plug in bend – Hot plugging
Plugging for cutting
-
Hot Tap and Stopple
Pressure containment
-
Risk evaluation
-
Corrective Maintenance
Valve replacement / Pipe repair clamps
-
ABiS ™ Air Bag Isolation System
Flexible double barrier system for safe welding on hydrocarbon filled systems without cleaning / flushing.
-
TTFP ™ Twin-Tyred Flexible Plug
Flexible double barrier system for isolation of low pressurized system
-
Plugs – topside or subsea
Plugs for manual or ROV operations, wide range of applications and pressure ratings
-
Tethered Plugs
The tethered plug is used for controlled plugging through a cable. Setting on live systems.
-
Plugging with High friction Pigs
High friction pigs are used for low pressure sealing of pipelines by running the pigs to the isolation location by a standard pigging operation.
-
Hot Tap and Stopple
Proven service used for installation of branches or for isolation of live systems
-
Valkyrie ™
BackGas system. Specialized Purge gas system for welding operations. Full retrieval through minimum 1” Threadolet
-
Skadiplug ™
Remote operated plug system using ice plugs. Reducing down time and eliminating the need for extensive isolation activities
-
AOGV ™
Add On Gate Valve, is a field proven patented technology which inserts an isolation spade on a live flanged connection thereby reducing down time and eliminating the need for extensive isolation activities.
-
Elbow Flange Weld Tester
IK’s Elbow Flange Weld Testers reduce the cost by carrying out localised pressure testing on new and existing flange welds and pipe components.
-
Flange Weld Testers
IK’s Flange Weld Testers reduce the cost by carrying out localised pressure testing on new and existing flange welds and pipe components.
-
Weld Testers
IK-Group’s Tyre Type Flange Weld Testers reduce the cost by carrying out localised pressure testing on new and existing flange welds and pipe components.
-
High Pressure Test Plug (HP Plug)
-
Hydrostatic Pressure Test Kit
Hydrostatic Pressure Test Kit
-
Internal Joint Tester HP – Hydraulic
-
Internal Joint Tester
IK’s Internal Joint Testers reduce the cost by carrying out localised pressure testing on new and existing flange welds, butt joints and valve integrity.
-
Internal Joint Testers – Low Pressure
All ns Pipe sizes & Schedules from 2″- 48″
-
Internal Weld Tension Tester
IK’s Internal Weld Tension Testers reduce the cost by carrying out localised pressure testing on new and existing flange welds and pipe components.
-
Tank Nozzle Joint/Weld Tester
IK’s Tank Nozzle Testers reduce the cost by carrying out localised pressure testing on new
and existing branch outlet flanges and pipe components for hydrostatic test -
HP Elbow Plug
High Pressure Elbow Plugs are used when a weld or joint needs hydro testing but no flanges are available.
-
HP Plug
IK High Pressure Pipe Plugs are recommended for hydrostatic test applications.
-
Low Pressure Plug (LP Plug)
All ns Pipe sizes & Schedules from 4″ upwards
-
Mechanical Expansion Plug – Double Seal
1 ½” – 18″ ns Pipes (other sizes upon request)
-
Mechanical Expansion Plug – Single Seal
Pipe ID Range: 1 ½” – 18″ ns Pipes
-
Test Plugs
IK-UK’s Medium Pressure Pipe Plugs features the proven principle of the inflatable polyurethane tyre. Larger diameter plugs have the multi-tyre design – independent inflation systems.
-
Specialised Pipeline Isolation & Test Plugs
Plug for passing bends or standard pipes
-
Isolation Tools
IK-UK’s Twin Tyre Flexible Isolation Plug is a simple, reliable and economical tool for providing positive and proven isolation before hot work commences.
-
Isolation Tools
IK-UK’s Twin Tyre Multi Plug is a simple, reliable and economical tool for providing positive and proven isolation before hot work commences. It is also capable of hydrostatically testing any new welds afterwards – being a significant cost saving.
-
ABiS
The IK ABiS isolation system has been designed for isolation purposes when welding on hydrocarbon systems.
It incorporates the functions of a double block & bleed barrier (DB&B) whilst constantly purging and monitoring the inert gas between 2 barriers. -
Inflatable Pipe Stoppers (Air Bags)
-
Twin-Tyred Flexible Isolation Plug
The Multi Plug or Twin-Tyred Flexible Isolation Plug’s main function is to provide a double block & bleed (DB&B™) isolation with by-pass or inert gas purge function during welding.
-
Inflatable Back-gas equipment
Using real scientific breakthrough technology, Argweld® PurgElite® Inflatable Tube and Pipe Weld Purging Systems introduces to the market place for the first time a ‘New’ 1 inch (25 mm) System for small diameter tubes and pipes.
-
Twin Tyre Multi Plug
IK’s Twin Tyre Multi Plug is presently used at many Oil & Gas Refineries worldwide for hot-work isolation.
For further information, please contact our Sales Team. -
Multi Tools
IK’s Twin Seal Multi Plug is a simple, reliable and economical tool for providing positive and proven isolation before hot work commences.
-
Mini ABiS ™
The IK ABiS ™ isolation system has been designed for isolation purposes when welding on hydrocarbon systems.
-
ROV operated Pipe Circle Saw
ROV operated ¼” – 1″ Pipe Circle Saw
-
ROV Underwater Chipping Hammer
IK’s ROV operated Underwater Chipping Hammer (UCH) is a compact chipper for light scaling in underwater applications. The design of this tool consists of 2 pressure lines, allowing for simple operation.
-
ROV Wire Cutter
IK’s ROV operated Hydraulic Wire Cutter (HWC) is an easy tool to install and operate; cutting is achieved by hydraulically driving a hardened steel guillotine blade through the steel rope.
-
ROV Cable Cutter
IK’s ROV operated Hydraulic Cable Cutter (HCC) is an easy tool to install and operate by ROV, works like a scissor, with two blades with guides for extra strength and durability.
-
High Friction Piggable Tools
High Friction Piggable Tools are primarily used to provide a low pressure, high seal isolation during the installation and maintenance of a pipeline.
