Buckle Reinforcement Clamp

The structural clamp is a split clamp that is closed around the damaged location and then bolted together.

The clamp will be fabricated with a geometry to suit the pipe as found and surveyed.

The repair clamp includes two halves that are hinged together at the top. The hinges are for installation proposes and will not be subjected to structural load in operation.

The two clamp halves have setting rings, slips and soft packers as half rings inside the body, at both ends.

The clamp has tension bolts at both ends which are torqued up to the pre-determined load level, setting the slips and fixing the clamp onto the pipe.

Soft radial seals are compressed by split actuator rings at each end of the clamp which combines with the clamp half face seals to contain any leakage into the clamp annulus.


Installation: By ROV or Divers

Clamp life time: TBD

Fore more technical description, please contact Pål Angell Bergh +47 915 51 515

  • Pipe dimensions: ½” – 36”
  • Design pressure: 0 – 600 bar
  • Sealing philosophy: Single or double w. test port
  • Material: Customer design
  • Setting: Torque bolts or hydraulic

Contact for this product is: