• Products and Services
    • Subsea
    • Isolation and repair
    • PROCESS PLANT SERVICES
    • Pipeline Cleaning and Commissioning
    • Pressure torque and calibration
  • Rental Services
    • Hydrostatic weld testing
    • Subsea ROV tools
    • Torque tools
  • IK-Group
  • Locations
    • IK-Norway
    • IK-UK
    • IK-Saudi
    • Online Electronics
  • HSEQ
  • News
  • Careers
  • Contact
  • We provide services, products and solutions to the Subsea IMR, MMO and SURF sector.
    Subsea
    IK SubSea have the strength and confidence needed to complement your next project challenge with proven technology and practical solutions.
    Integrity, Repair and Modifications
    • Select Option
    • Asset Integrity
    • Isolation and Plugging
    • Modifications
    • Studies
    • Pipeline, Flowline and umbilical Repair
    • ROV Tools
  • Epoxy Injection

    Repair of severely corroded 6” water injection flow line in a subsea manifold. Installation of split clamp with soft packers
    and injection of the epoxy in order to replace and support the pipe wall at the corroded areas.

  • Hot tap machines

    IK perform hot tapping services using its own machines. The machines span from small off the shelf machines to bigger machines capable of large dimension holes on high pressure process systems.

  • Hydrostatic Testing

    IK-Norway’s Hydrostatic Pressure Testing Kit

  • 10” Flushing Plug

    The 10” Flushing Cap is based on a concept that are used on hubs and flange ends when then internal ID of the hub or pipe is precisely defined with defined dimensions and tolerances.

  • 16” and 24” Grillages

    IK Norway has design, fabricated, tested and prepared 16” Grillages and 24” Grillages to be fitted to the Alvheim FPSO.
    Grillages intention is to prevent debris from entering the Alvheim FPSO hull intakes.

  • SubSea Torque Wrench

    Mod: SSTW 03-OML8

  • ROV operated SubSea Torque Spinning Wrench

    ROV operated spinning tool for all kinds of subsea bolting operations.

  • SubSea Torque Wrench

    Mod: SSTW 01-20

  • High Friction Piggable Tools

    High Friction Piggable Tools are primarily used to provide a low pressure, high seal isolation during the installation and maintenance of a pipeline.

  • ROV Cable Cutter

    IK’s ROV operated Hydraulic Cable Cutter (HCC) is an easy tool to install and operate by ROV, works like a scissor, with two blades with guides for extra strength and durability.

  • ROV Wire Cutter

    IK’s ROV operated Hydraulic Wire Cutter (HWC) is an easy tool to install and operate; cutting is achieved by hydraulically driving a hardened steel guillotine blade through the steel rope.

  • ROV Underwater Chipping Hammer

    IK’s ROV operated Underwater Chipping Hammer (UCH) is a compact chipper for light scaling in underwater applications. The design of this tool consists of 2 pressure lines, allowing for simple operation.

  • ROV operated Pipe Circle Saw

    ROV operated ¼” – 1″ Pipe Circle Saw

  • Concrete Rehabilitation

    Application of concrete and grouted solutions for platform life extension and repair and use of grouting into sealing compartments.

  • Engineering Studies

    IK design specialized solutions for modification and repair of piping and pipeline systems.

  • Pipeline Clamps – Hot Tap

    IK design and deliver clamps for piping and pipelines. The clamps can be designed for a large variety of dimensions and pressure classes and for several purposes such as tie in, hot tap, repair, reinforcement. etc.

  • Plug, Tethered, Piggable

    IK design and deliver pipe isolation plugs for remote operation and setting. IK apply several methods for setting the plugs, electrical operated, hydraulic operated or mechanical operated.

  • Plug, Tethered, Tractor

    IK design and deliver pipe isolation plugs for remote operation and setting.

  • ROV Tool, Brushing

    IK design and deliver special custom ROV tools for brushing and cleaning of equipment and components at subsea structures and modules. Typical tools are for cleaning of old pipes, externally and internally. Removal of paint, corrosion and marine growth.

  • ROV Tool, Cleaning

    IK design and deliver special custom ROV tools for cleaning of equipment and components of subsea structures and modules. Typical tools are for cleaning of old pipes, externally and internally. Removal of paint, corrosion and marine growth.

  • ROV Tool, Cutting

    IK design and deliver special ROV or diver operated tools for cutting and machining operations. IK has a staff with broad subsea experience and the state of the art 3-D tools for efficient design of special tools.

  • ROV Tool, Drilling

    IK design and deliver special custom ROV tools for drilling holes in equipment and components at subsea structures and modules. Typical tools are for drilling into old pipes, externally and internally.

  • ROV Tool, Inhibition Injection Tool

    IK design and deliver pipeline tools for a large variety of purposes. Typical tools for installation of inhibition sticks into pipelines have been delivered for several dimensions and purposes.

  • ROV Tool, Milling

    IK design and deliver special ROV or diver operated tools for milling and machining operations. IK has a staff with broad subsea experience and the state of the art 3-D tools for efficient design of special tools.

  • ROV Tooling, General Tooling

    IK design and deliver special custom ROV tools for a large variety of purposes. Typical tools are for handling, cutting, inspection, flushing etc.

  • ROV operated shackles

    IK design and deliver subsea ROV operated shackles. The shackles are based on a hydraulic operated pin function, with custom specified functions with regard to interfaces and installation methods.

  • ROV Suction Arm

    IK design and deliver subsea tools for a large variety of purposes. Typical tools are for assisting ROVs to keep position in difficult operations with wave currents and other operational issues making station keeping challenging.

  • Special Design, Lifting Tools

    IK design and deliver subsea recovery tools for a large variety of purposes. Typical tools are for handling, lifting and holdback for pipelines, risers and other equipment.

  • Special Design, ROV panels

    IK design and deliver subsea tools for a large variety of purposes. Typical tools are for monitoring and controlling subsea operations through ROV panels.

  • Special Design, Support Structures

    IK Design, manufacturing and deliver specialized solutions for modification and repair of subsea systems and components. Typical products are structural repair clamps, new braces and stays for reinforcement or for replacement.

  • ROV General Purpose Cleaning Brush (GPCB)

    The general purpose cleaning brush has been design to allow marine growth removal and subsea cleaning tasks to be performed.

  • Subsea Impact Wrench

    Tool can be hired separately, with accessories, and with qualified personnel.

  • ENS: Nut Splitter

    Tool can be hired separately, with accessories, and with qualified personnel.

  • Epoxy Injection

    IK have competence and tools for epoxy injection related to repair and sealing of various systems and components.

  • Grouting Tools

    Tools for application of concrete and grouted solutions for platform life extension and repair and use of grouting into sealing compartments.

  • Pipeline Recovery Tool, Pin Through

    IK design and deliver subsea recovery tools for a large variety of purposes The Pin Through Recovery Tool is special intended for pipelines or pipes / members where the standard PRT tools cannot be used.

  • Pipeline Recovery Tools, external

    IK design and deliver pipeline clamping tools for a large variety of purposes. Typical tools are for handling, lifting and holdback for pipelines and risers. IK has a staff with broad subsea experience and we have designed, delivered and operated several types of subsea tools.

  • Pipeline Recovery Tool, internal

    IK design and deliver subsea recovery tools for a large variety of purposes. Typical tools are for handling, lifting and holdback for pipelines and riser. IK has a staff with broad subsea experience and we have designed, delivered and operated several types recovery tools.

  • ROV Operated Plugs

    IK design and deliver ROV operated plugs for piping and pipelines. The plugs can be delivered for a large variety of dimensions and pressure classes and for several purposes such permanent sealing, temporary sealing, test purposes etc.

  • Pipeline clamp – Structural

    IK design and deliver clamps for repair of structures, risers and pipelines. The clamps can be designed for a large variety of dimensions and load situations.

  • Special Design, Protection Structures

    IK Design, manufacture and deliver specialized solutions for modification and repair of subsea systems and components: Typicla protection structures for dropped objects, trawling etc.

  • Caison Repair – Remote Operated Clamps

    Caison Repair by use of remote operated clamps

  • Structural Clamp for Jacket Leg

    Structural Repair Clamp

  • Brace Replacement and Sleeve Repair

    Brace replacement and Sleeve repair

  • Structural Sealing Clamp – 90 bar, gas

    Repair Clamp 32” Gas line

  • GFO hold down system

    GFO hold down system. Safe and simple removal / reinstallation of loading buoys.

     

  • Tie Inn Tool

    Tie Inn Tool Total Rebuild and Modifications

  • Flexibles Risers Hold Back Clamp

    Flexibles Risers Hold Back Clamp

  • Cable Recovery Clamp

    Friction based recovery clamp for umbilicals, risers and cables.

     

  • GF-C J-Tube extension

  • 24” ROV Blind Hub

    24” ROV Blind Hub / Cameron Interface

  • Caisson Clamps

    Caisson Clamps

  • Manifold Repair

    Remote operated pipe repair by use of mechanical and hydraulic systems.

  • Remote Operated Clamp for Cathodic Connection

    C-clamp for permanent and low resistance anode bank connection

  • Buckle Reinforcement Clamp

    The structural clamp is a split clamp that is closed around the damaged location and then bolted together.

  • Structural Integrity Clamp

    IK-Norway have experience with making a variety of patch clamps to seal leaks in various locations, depth and pipe diameter.

  • Combined Structural and Sealing Clamp

    With circumferential packers to mechanically secure the flange couple in combination with external injection of a pressure activated sealant

  • Hang-Off Clamp with Torque Tool

    Hang-Off Clamp

    The IK Hang-Off Clamp is a mechanically operated lifting clamp. The main application for this type of Clamp is handling of any circular shape profiles (pipe, umbilical, cable, etc.) where a high pulling tension occurs.

  • Patch Repair Clamp

    The sealing solution is requested to be an ROV Operated Patch Clamp, to be clamped outside the pipe and comprises an elastomeric seal that is engaged by pressure.

  • Conductor Clamps

    Conductor Clamps